Novodur Ultra 4105
Novodur® acrylonitrile butadiene styrene (ABS) polymers feature high surface quality and good impact strength. Novodur® Ultra 4105 is a PC modified high heat injection molding grade with very high impact strength. Furthermore, it is of low emission, i.e. suitable to produce parts which fulfill interior emission requirements of the automotive OEMs.
Key Features
- High gloss
- Heat resistance
- Low temprerature toughness
- Low emission
Applications
- Unpainted automotive interior: seat trims, centre consoles
- Automotive exterior trim : mirror housings, exterior pillars & trims, spoilers
- Painted/ decorated Automotive interior: glove boxes, centre consoles, instrument panel trims
- Housings for electrical & electronic devices
Industries
-
Grade Version
-
Properties
物性
２３℃での無色製品の標準値 試験方法 単位 数値 流動学的性質 Melt Volume Rate 220 °C/10 kg ISO 1133 cm³/10 min 9 Melt Volume Rate, 260 °C/5 kg ISO 1133 cm³/10 min 14 機械的性質 Charpy Notched Impact Strength, 23° C ISO 179/1eA kJ/m² 40 Charpy Notched Impact Strength, -30 °C ISO 179/1eA kJ/m² 32 Charpy Unnotched Impact Strength, 23 °C ISO 579 kJ/m² no break Charpy Unnotched Impact Strength, -30 °C ISO 579 kJ/m² no break Izod Notched Impact Strength, 23 °C ISO 180/A kJ/m² 38 Izod Notched Impact Strength, -30 °C ISO 180/A kJ/m² 31 Tensile Modulus ISO 527 MPa 2000 Tensile Stress at Yield, 23 °C ISO 527 MPa 45 Tensile Strain at Yield, 23 °C ISO 527 % 3.7 Tensile Stress at Break, 23 °C ISO 527 MPa 38 Tensile Strain at Break, 23 °C ISO 527 % > 15 Nominal Strain at Break, 23 °C ISO 527 % 25 Flexural Modulus, 23 °C ISO 178 MPa 2000 Flexural Strength, 23 °C ISO 178 MPa 70 Hardness, Ball Indentation ISO 2039-1 MPa 94 熱的性質 Vicat Softening Temperature, VST/B/120 (50N, 120 °C/h) ISO 306 °C 109 Vicat Softening Temperature VST/B/50 (50N, 50 °C/h) ISO 306 °C 107 Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) ISO 75 °C 99 Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa) ISO 75 °C 108 Coefficient of Linear Thermal Expansion ISO 11359 10-6/°C 90 電気的性質 Dielectric Strength, Short Time, 1.0 mm IEC 60243-1 kV/mm 37 Comparative Tracking Index IEC 60112 V 600 進行中 Density ISO 1183 kg/m³ 1070 Glow wire test (GWFI), 2.0 mm IEC 60695-2-12 °C 700 Processing Linear Mold Shrinkage ISO 294-4 % 0.5 - 0.8 Melt Temperature Range ISO 294 °C 240 - 260 Mold Temperature Range ISO 294 °C 60 - 80 Drying Temperature - °C 80 Drying Time - h 2 - 4 Typical values for uncolored products
Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities.
Please consult our local sales or technical representatives for details. -
Processing
進行中
-
Safety Data Sheet