Products

Terluran GP-35

Terluran® GP-35 is high-flow, general purpose injection molding grade with good ductility, intended for moldings with thin walls and/or adverse flow length to wall ratio.

Key Features

  • Excellent colorability
  • High flowability
  • Good impact resistance
  • Good heat distortion resistance
  • High quality surface finish and gloss
  • Great mechanical strength and rigidity

Applications

  • Injection molding
  • Thin wall components for telecommunications
  • Household and sanitary appliances
  • Toys
  • Automotive components
  • Electroplating
  • Grade Version
  • Properties

    Properties of Terluran GP-35

    Property, Test Condition Standard Unit Values
    Rheological Properties
    Melt Flow Rate, 200 °C/5 kg ASTM D 1238 g/10 min 3.1
    Melt Flow Rate, 220 °C/10 kg ASTM D 1238 g/10 min 34
    Melt Volume Rate 230 °C/3.8 kg ASTM D 1238 cm³/10 min 11
    Mechanical Properties
    Izod Notched Impact Strength, 23 °C (73 °F) ASTM D 256 ft-lb/in 4.5
    Izod Notched Impact Strength, -18 °C (0 °F) ASTM D 256 ft-lb/in 1.6
    Izod Notched Impact Strength, -30 °C (-22 °F) ASTM D 256 ft-lb/in 1.5
    Tensile Stress at Yield, 23 °C ASTM D 638 psi 6520
    Tensile Modulus ASTM D 638 psi x 10³ 362
    Elongation, Failure ASTM D 638 % 2.4
    Flexural Strength, 23 °C ASTM D 790 psi 9430
    Flexural Modulus, 23 °C ASTM D 790 psi x 10³ 341
    Hardness, Rockwell ASTM D 785 R scale 102
    Thermal Properties
    Vicat Softening Temperature, VST/A/50 (10N, 50 °C/h) ISO 306 °F 203
    DTUL @ 264 psi - Unannealed ASTM D 648 °F 167
    DTUL @ 66 psi - Unannealed ASTM D 648 °F 192
    DTUL @ 264 psi - Annealed ASTM D 648 °F 206
    DTUL @ 66 psi - Annealed ASTM D 648 °F 213
    Electrical Properties
    Dielectric Constant at 106 CPS (1000000 Hz, 0,0394 in) ASTM D 150 - 2.8
    Volume Resistivity ASTM D 257 - >1013
    Other Properties
    Density (ASTM ) ASTM D 792 g/cm³ 1.04
    Water Absorption, Saturated at 23 °C ASTM D 570 % 0.95
    Processing
    Linear Mold Shrinkage ASTM D 955 in/in 0 - 0.01
    Melt Temperature Range - °F 425 - 500
    Mold Temperature Range - °F 85 - 140
    Injection Velocity - in/s 8
    Drying Temperature - °F 175
    Drying Time - h 2 - 4

    Typical values for uncolored products
    Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities.
    Please consult our local sales or technical representatives for details.

  • Processing

    Processing of Terluran GP-35

  • Safety Data Sheet