TERLURAN GP-22
Terluran® GP-22 is an easy-flow, general purpose injection molding grade with high resistance to impact and heat distortion; intended for a wide range of applications, particularly in the housings sector.
Key Features
- Excellent colorability
- Medium flow
- Good impact resistance
- Good heat distortion resistance
- High quality surface finish and gloss
- Great mechanical strength and rigidity
Applications
- Injection molding
- Appliance housings
- Household and sanitary appliances
- Toys
- Automotive components
- Consumer products
-
Grade Version
-
Properties
物性
23℃での無色製品の標準値 試験方法 単位 数値 流動学的性質 Melt Volume Rate 220 °C/10 kg ISO 1133 cm³/10 min 19 機械的性質 Izod Notched Impact Strength, 23 °C ISO 180/A kJ/m² 26 Izod Notched Impact Strength, -30 °C ISO 180/A kJ/m² 8 Charpy Notched Impact Strength, 23° C ISO 179/1eA kJ/m² 22 Charpy Notched Impact Strength, -30 °C ISO 179/1eA kJ/m² 8 Charpy Unnotched, 23 °C ISO 179/1eU kJ/m² 180 Charpy Unnotched, -30 °C ISO 179/1eU kJ/m² 100 Tensile Stress at Yield, 23 °C ISO 527 MPa 45 Tensile Strain at Yield, 23 °C ISO 527 % 2.6 Tensile Modulus ISO 527 MPa 2300 Nominal Strain at Break, 23 °C ISO 527 % 10 Flexural Strength, 23 °C ISO 178 MPa 65 Hardness, Ball Indentation ISO 2039-1 MPa 97 熱的性質 Vicat Softening Temperature VST/B/50 (50N, 50 °C/h) ISO 306 °C 96 Vicat Softening Temperature, VST/A/50 (10N, 50 °C/h) ISO 306 °C 105 Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) ISO 75 °C 94 Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa) ISO 75 °C 99 Coefficient of Linear Thermal Expansion ISO 11359 10-6/°C 80 - 110 Thermal Conductivity ISO 22007-4 W/(m K) 0.17 電気的性質 Dissipation Factor (100 Hz) IEC 62631-2-1 10-4 48 Dissipation Factor (1 MHz) IEC 62631-2-1 10-4 79 Relative Permittivity (100 Hz) IEC 62631-2-1 - 2.9 Relative Permittivity (1 MHz) IEC 62631-2-1 - 2.8 Volume Resistivity IEC 62631-3-1 Ω*m >1013 Surface Resistivity IEC 62631-3-1 Ω >1013 他の物性 Yellowness Index DIN 6167 - 13 進行中 Density ISO 1183 kg/m³ 1040 Water Absorption, Saturated at 23 °C ISO 62 % 1 Moisture Absorption, Equilibrium 23 °C/50% RH ISO 62 % 0.22 Processing Linear Mold Shrinkage ISO 294-4 % 0.4 - 0.7 Melt Temperature Range ISO 294 °C 220 - 260 Mold Temperature Range ISO 294 °C 30 - 80 Injection Velocity ISO 294 mm/s 200 Drying Temperature - °C 80 Drying Time - h 2 - 4 Typical values for uncolored products
Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities.
Please consult our local sales or technical representatives for details. -
Processing
進行中
-
Safety Data Sheet