Zylar 650
The product line Zylar® comprises blends from styrene, butadiene and methylmethacrylate copolymers (MBS). The blends are highly transparent, tough and show a good chemical resistance. Depending on the application, they can be a low density alternative for polycarbonate, PET-G or transparent ABS (MABS). The grades are suitable for medical applications, food contact statements are available upon request. Zylar®650 provides a good balance between transparency and toughness and is also available with UV package.
Key Features
- Balanced properties
- High flowability
- Sterilisable(ETO,NO2,Irradiation)
- Toughness
- Low density
Applications
- Household applications
- Food contact applications
- Medical devices
- Medical diagnostic equipment
- Toys, sports & leisure
-
Grade Version
Inicie sesión o Regístrese con Ineos Styrolution para descargar documentos
¿Es Nuevo en INEOS Styrolution? Regístrese Registrar
-
Properties
Properties of Zylar 650
Property, Test Condition Standard Unit Values Rheological Properties Melt Flow Rate, 200 °C/5 kg ASTM D 1238 g/10 min 4 Mechanical Properties Izod Notched Impact Strength, 23 °C (73 °F) ASTM D 256 ft-lb/in 3 Impact Strength, Gardner ASTM D 5420 in-lbs 150 Tensile Stress at Yield, 23 °C ASTM D 638 psi 3800 Tensile Modulus ASTM D 638 psi x 10³ 310 Elongation, Failure ASTM D 638 % 40 Flexural Strength, 23 °C ASTM D 790 psi 7000 Flexural Modulus, 23 °C ASTM D 790 psi x 10³ 280 Hardness, Rockwell ASTM D 785 R scale 84 Thermal Properties Vicat Softening Temperature, B/1 ( 120 °C/h, 10N) ASTM D 1525 °F 210 Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) - °F 197 Optical Properties Refractive Index, Sodium D Line ASTM D 542 - 1,57 Light Transmission at 550 nm ASTM D 1003 % 90 Haze ASTM D 1003 % 1,8 Other Properties Density (ASTM ) ASTM D 792 g/cm³ 1,05 Water Absorption, Saturated at 23 °C ASTM D 570 % 0,1 Processing Melt Temperature Range - °F 400 - 460 Mold Temperature Range - °F 80 - 130 Rear Temperature Range - °F 355 - 415 Middle Temperature Range - °F 365 - 425 Front Temperature Range - °F 375 - 435 Drying Temperature - °F 150 Drying Time - h 2 Max Service Temperature - °F 480 Typical values for uncolored products
Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities.
Please consult our local sales or technical representatives for details. -
Processing
Processing of Zylar 650
-
Safety Data Sheet