NOVODUR P2H-AT
Novodur® P2H-AT is a general purpose injection molding grade providing high flowability and contains an antistatic additive. It is designed for best aesthetics: stable high gloss and smooth finish.
Key Features
- Balanced properties
- Easy processing
- Good paintability
- High gloss
Applications
- Housings for electrical & electronic devices
- Electrical and electronic components, switches, house automation
- Coffee machines
- Vacuum cleaner housings
- Cosmetic packaging
Industries
-
Grade Version
Please Sign in or Register with INEOS Styrolution to download REACH and other Regulatory Documents
New to INEOS Styrolution? Registration
-
Properties
Properties of NOVODUR P2H-AT
Property, Test Condition Standard Unit Values Rheological Properties Melt Volume Rate 220 °C/10 kg ISO 1133 cm³/10 min 37 Mechanical Properties Charpy Notched Impact Strength, 23° C ISO 179/1eA kJ/m² 18 Charpy Notched Impact Strength, -30 °C ISO 179/1eA kJ/m² 8 Charpy Unnotched, 23 °C ISO 179/1eU kJ/m² 100 Charpy Unnotched, -30 °C ISO 179/1eU kJ/m² 80 Izod Notched Impact Strength, 23 °C ISO 180/A kJ/m² 18 Izod Notched Impact Strength, -30 °C ISO 180/A kJ/m² 9 Tensile Modulus ISO 527 MPa 2500 Tensile Stress at Yield, 23 °C ISO 527 MPa 44 Tensile Strain at Yield, 23 °C ISO 527 % 2.1 Tensile Stress at Break, 23 °C ISO 527 MPa 32 Nominal Strain at Break, 23 °C ISO 527 % > 18 Flexural Modulus, 23 °C ISO 178 MPa 2400 Flexural Strength, 23 °C ISO 178 MPa 70 Hardness, Shore D ISO 868 - 110 Thermal Properties Vicat Softening Temperature, VST/B/120 (50N, 120 °C/h) ISO 306 °C 100 Vicat Softening Temperature VST/B/50 (50N, 50 °C/h) ISO 306 °C 98 Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) ISO 75 °C 93 Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa) ISO 75 °C 97 Coefficient of Linear Thermal Expansion ISO 11359 10-6/°C 90 Electrical Properties Dielectric Strength, Short Time, 1.0 mm IEC 60243-1 kV/mm 34 Dielectric Strength, Short Time, 1.5 mm IEC 60243-1 kV/mm 34 Comparative Tracking Index IEC 60112 V 600 Other Properties Density ISO 1183 kg/m³ 1050 UL94 rating at 1.5 mm thickness IEC 60695-11-10 - HB Glow wire test (GWFI), 2.0 mm IEC 60695-2-12 °C 700 Processing Melt Temperature Range ISO 294 °C 230 - 260 Mold Temperature Range ISO 294 °C 60 - 80 Linear Mold Shrinkage ISO 294-4 % 0.4 - 0.7 Drying Temperature - °C 80 Drying Time - h 2 - 4 Typical values for uncolored products
Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities.
Please consult our local sales or technical representatives for details. -
Processing
Processing of NOVODUR P2H-AT
-
Safety Data Sheet