Products

Terluran GP-35

Terluran® GP-35 is high-flow, general purpose injection molding grade with good ductility, intended for moldings with thin walls and/or adverse flow length to wall ratio.

Key Features

  • Excellent colorability
  • High flowability
  • Good impact resistance
  • Good heat distortion resistance
  • High quality surface finish and gloss
  • Great mechanical strength and rigidity

Applications

  • Injection molding
  • Thin wall components for telecommunications
  • Household and sanitary appliances
  • Toys
  • Automotive components
  • Electroplating
  • Grade Version
  • Properties

    Properties of Terluran GP-35

    Property, Test Condition Standard Unit Values
    Rheological Properties
    Melt Volume Rate 220 °C/10 kg ISO 1133 cm³/10 min 34
    Mechanical Properties
    Izod Notched Impact Strength, 23 °C ISO 180/A kJ/m² 22
    Izod Notched Impact Strength, -30 °C ISO 180/A kJ/m² 7
    Charpy Notched Impact Strength, 23° C ISO 179/1eA kJ/m² 19
    Charpy Notched Impact Strength, -30 °C ISO 179/1eA kJ/m² 7
    Charpy Unnotched, 23 °C ISO 179/1eU kJ/m² 125
    Charpy Unnotched, -30 °C ISO 179/1eU kJ/m² 90
    Tensile Stress at Yield, 23 °C ISO 527 MPa 44
    Tensile Strain at Yield, 23 °C ISO 527 % 2.4
    Tensile Modulus ISO 527 MPa 2300
    Nominal Strain at Break, 23 °C ISO 527 % 12
    Flexural Strength, 23 °C ISO 178 MPa 65
    Hardness, Ball Indentation ISO 2039-1 MPa 99
    Thermal Properties
    Vicat Softening Temperature VST/B/50 (50N, 50 °C/h) ISO 306 °C 95
    Vicat Softening Temperature, VST/A/50 (10N, 50 °C/h) ISO 306 °C 102
    Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) ISO 75 °C 92
    Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa) ISO 75 °C 95
    Coefficient of Linear Thermal Expansion ISO 11359 10-6/°C 80 - 110
    Thermal Conductivity ISO 22007-4 W/(m K) 0.17
    Electrical Properties
    Volume Resistivity IEC 62631-3-1 Ω*m >1013
    Surface Resistivity IEC 62631-3-1 Ω >1013
    Optical Properties
    Yellowness Index DIN 6167 - 13
    Other Properties
    Density ISO 1183 kg/m³ 1040
    Water Absorption, Saturated at 23 °C ISO 62 % 0.95
    Moisture Absorption, Equilibrium 23 °C/50% RH ISO 62 % 0.24
    Processing
    Linear Mold Shrinkage ISO 294-4 % 0.4 - 0.7
    Melt Temperature Range ISO 294 °C 220 - 260
    Mold Temperature Range ISO 294 °C 30 - 80
    Injection Velocity ISO 294 mm/s 200
    Drying Temperature - °C 80
    Drying Time - h 2 - 4

    Typical values for uncolored products
    Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities.
    Please consult our local sales or technical representatives for details.

  • Processing

    Processing of Terluran GP-35

  • Safety Data Sheet