Products

Terluran HI-10

Terluran® HI-10 is an medium flow, injection molding grade with very high resistance to impact with excellent heat distortion and suitable for injection molding and extrusion.

Key Features

  • High toughness
  • Very high impact
  • Medium flow
  • Great mechanical strength and rigidity
  • High impact at sub-zero temperatures

Applications

  • Injection molding
  • Compounding
  • Appliance housings
  • Lawn & garden components requiring superior toughness
  • Grade Version
  • Properties

    Properties of Terluran HI-10

    Property, Test Condition Standard Unit Values
    Rheological Properties
    Melt Volume Rate 220 °C/10 kg ISO 1133 cm³/10 min 5.5
    Mechanical Properties
    Izod Notched Impact Strength, 23 °C ISO 180/A kJ/m² 36
    Izod Notched Impact Strength, -30 °C ISO 180/A kJ/m² 14
    Charpy Notched Impact Strength, 23° C ISO 179/1eA kJ/m² 35
    Charpy Notched Impact Strength, -30 °C ISO 179/1eA kJ/m² 13
    Charpy Unnotched, -30 °C ISO 179/1eU kJ/m² 140
    Tensile Stress at Yield, 23 °C ISO 527 MPa 38
    Tensile Strain at Yield, 23 °C ISO 527 % 2.8
    Tensile Modulus ISO 527 MPa 1900
    Nominal Strain at Break, 23 °C ISO 527 % 9
    Flexural Strength, 23 °C ISO 178 MPa 56
    Hardness, Ball Indentation ISO 2039-1 MPa 74
    Thermal Properties
    Vicat Softening Temperature VST/B/50 (50N, 50 °C/h) ISO 306 °C 90
    Vicat Softening Temperature, VST/A/50 (10N, 50 °C/h) ISO 306 °C 103
    Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) ISO 75 °C 93
    Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa) ISO 75 °C 97
    Coefficient of Linear Thermal Expansion ISO 11359 10-6/°C 80 - 110
    Thermal Conductivity ISO 22007-4 W/(m K) 0.17
    Electrical Properties
    Dissipation Factor (100 Hz) IEC 62631-2-1 10-4 54
    Dissipation Factor (1 MHz) IEC 62631-2-1 10-4 82
    Relative Permittivity (100 Hz) IEC 62631-2-1 - 2.9
    Relative Permittivity (1 MHz) IEC 62631-2-1 - 2.8
    Volume Resistivity IEC 62631-3-1 Ω*m >1013
    Surface Resistivity IEC 62631-3-1 Ω >1013
    Optical Properties
    Yellowness Index DIN 6167 - 15
    Other Properties
    Density ISO 1183 kg/m³ 1030
    Water Absorption, Saturated at 23 °C ISO 62 % 1.03
    Moisture Absorption, Equilibrium 23 °C/50% RH ISO 62 % 0.21
    Processing
    Linear Mold Shrinkage ISO 294-4 % 0.4 - 0.7
    Melt Temperature Range ISO 294 °C 220 - 260
    Mold Temperature Range ISO 294 °C 30 - 80
    Injection Velocity ISO 294 mm/s 200
    Drying Temperature - °C 80
    Drying Time - h 2 - 4

    Typical values for uncolored products
    Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities.
    Please consult our local sales or technical representatives for details.

  • Processing

    Processing of Terluran HI-10

  • Safety Data Sheet