Home ProdukteABSNovodur® High HeatNOVODUR H701

Produkte

Region wählen:

Asien-Pazifik

NOVODUR H701

Novodur® acrylonitrile butadiene styrene (ABS) polymers feature high surface quality and good impact strength. Novodur® H701 is an ABS injection molding grade with a good balance of heat resistance, impact strength and flowability. Furthermore, it is of low emission, i.e. suitable to produce parts which fulfill interior emission requirements of the automotive OEMs.

Key Features

  • Heat resistance
  • High gloss
  • Wide gloss range
  • Low emission
  • Wide gloss range
  • Low emission

Applications

  • Unpainted automotive interior: loudspeaker grills, air ventings
  • Unpainted automotive interior: steering wheel covers, roof consoles
  • Automotive exterior trim : mirror housings, exterior pillars & trims, spoilers
  • Painted/ decorated Automotive interior: glove boxes, centre consoles, instrument panel trims
  • Housings for electrical & electronic devices

Industries

  • Grade Version
  • Properties

    Properties of NOVODUR H701

    Property, Test Condition Standard Unit Values
    Rheological Properties
    Melt Volume Rate 220 °C/10 kg ISO 1133 cm³/10 min 8
    Mechanical Properties
    Charpy Notched Impact Strength, 23° C ISO 179/1eA kJ/m² 22
    Charpy Notched Impact Strength, -30 °C ISO 179/1eA kJ/m² 12
    Charpy Unnotched, 23 °C ISO 179/1eU kJ/m² 180
    Charpy Unnotched, -30 °C ISO 179/1eU kJ/m² 120
    Izod Notched Impact Strength, 23 °C ISO 180/A kJ/m² 22
    Izod Notched Impact Strength, -30 °C ISO 180/A kJ/m² 12
    Tensile Modulus ISO 527 MPa 2100
    Tensile Stress at Yield, 23 °C ISO 527 MPa 41
    Tensile Strain at Yield, 23 °C ISO 527 % 2,7
    Tensile Stress at Break, 23 °C ISO 527 MPa 33
    Tensile Strain at Break, 23 °C ISO 527 % > 15
    Nominal Strain at Break, 23 °C ISO 527 % 17
    Flexural Modulus, 23 °C ISO 178 MPa 2100
    Flexural Strength, 23 °C ISO 178 MPa 65
    Hardness, Ball Indentation ISO 2039-1 MPa 95
    Thermal Properties
    Vicat Softening Temperature, VST/B/120 (50N, 120 °C/h) ISO 306 °C 107
    Vicat Softening Temperature VST/B/50 (50N, 50 °C/h) ISO 306 °C 105
    Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) ISO 75 °C 99
    Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa) ISO 75 °C 105
    Coefficient of Linear Thermal Expansion ISO 11359 10-6/°C 90
    Electrical Properties
    Dielectric Strength, Short Time, 1.0 mm IEC 60243-1 kV/mm 33
    Comparative Tracking Index IEC 60112 V 600
    Other Properties
    Density ISO 1183 kg/m³ 1040
    Glow wire test (GWFI), 2.0 mm IEC 60695-2-12 °C 700
    Processing
    Linear Mold Shrinkage ISO 294-4 % 0,5 - 0,8
    Melt Temperature Range ISO 294 °C 230 - 260
    Mold Temperature Range ISO 294 °C 60 - 80
    Drying Temperature - °C 80
    Drying Time - h 2 - 4

    Typical values for uncolored products
    Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities.
    Please consult our local sales or technical representatives for details.

  • Processing

    Processing of NOVODUR H701

  • Safety Data Sheet
    Download Safety Data Sheet