Home ProdukteABSNovodur® Novodur P2HGV

Produkte

Region wählen:

Asien-Pazifik

Novodur P2HGV

Novodur® acrylonitrile butadiene styrene (ABS) polymers feature high surface quality and good impact strength. Novodur® P2HGV is a 16.5% glass fiber reinforced injection molding grade which provides high rigidity and enhanced heat resistance.

Key Features

  • Well extrudable
  • Reinforcement
  • Heat resistance
  • Rigidity

Applications

  • Automotive exterior trim : mirror housings, exterior pillars & trims, spoilers

Industries

  • Grade Version
  • Properties

    Properties of Novodur P2HGV

    Property, Test Condition Standard Unit Values
    Rheological Properties
    Melt Volume Rate 220 °C/10 kg ISO 1133 cm³/10 min 3
    Mechanical Properties
    Charpy Notched Impact Strength, 23° C ISO 179/1eA kJ/m² 6
    Charpy Notched Impact Strength, -30 °C ISO 179/1eA kJ/m² 5
    Charpy Unnotched, 23 °C ISO 179/1eU kJ/m² 18
    Charpy Unnotched, -30 °C ISO 179/1eU kJ/m² 20
    Izod Notched Impact Strength, 23 °C ISO 180/A kJ/m² 7
    Izod Notched Impact Strength, -30 °C ISO 180/A kJ/m² 5
    Tensile Modulus ISO 527 MPa 5500
    Tensile Stress at Break, 23 °C ISO 527 MPa 74
    Tensile Stress at Yield, 23 °C ISO 527 MPa 74
    Tensile Strain at Break, 23 °C ISO 527 % 2
    Nominal Strain at Break, 23 °C ISO 527 % 2
    Flexural Modulus, 23 °C ISO 178 MPa 5400
    Flexural Strength, 23 °C ISO 178 MPa 101
    Hardness, Ball Indentation ISO 2039-1 MPa 135
    Thermal Properties
    Vicat Softening Temperature, VST/B/120 (50N, 120 °C/h) ISO 306 °C 107
    Vicat Softening Temperature VST/B/50 (50N, 50 °C/h) ISO 306 °C 105
    Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) ISO 75 °C 102
    Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa) ISO 75 °C 106
    Coefficient of Linear Thermal Expansion ISO 11359 10-6/°C 40
    Electrical Properties
    Dielectric Strength, Short Time, 1.0 mm IEC 60243-1 kV/mm 32
    Comparative Tracking Index IEC 60112 V 575
    Other Properties
    Density ISO 1183 kg/m³ 1160
    UL94 rating at 1.5 mm thickness IEC 60695-11-10 - HB
    Glow wire test (GWFI), 2.0 mm IEC 60695-2-12 °C 700
    Processing
    Linear Mold Shrinkage ISO 294-4 % 0,2 - 0,4
    Melt Temperature Range ISO 294 °C 230 - 260
    Mold Temperature Range ISO 294 °C 60 - 80
    Drying Temperature - °C 80
    Drying Time - h 2 - 4

    Typical values for uncolored products
    Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities.
    Please consult our local sales or technical representatives for details.

  • Processing

    Processing of Novodur P2HGV

  • Safety Data Sheet
    Download Safety Data Sheet