NOVODUR H702
Novodur® acrylonitrile butadiene styrene (ABS) polymers feature high surface quality and good impact strength. Novodur® H702 is a high heat, high gloss injection molding grade with very good flowability. It is especially suitable for being painted.
Key Features
- Heat resistance
- Good paintability
- High gloss
Applications
- Housings for electrical & electronic devices
- Automotive exterior trim : mirror housings, exterior pillars & trims, spoilers
- Automotive parts
Industries
-
Grade Version
Bitte melden Sie sich an oder registrieren Sie sich bei INEOS Styrolution um REACH oder Regulatorische Dokumente herunterladen zu können
Neu bei INEOS Styrolution? Registrieren Kundenregistrierung
-
Properties
Properties of NOVODUR H702
Property, Test Condition Standard Unit Values Rheological Properties Melt Volume Rate 220 °C/10 kg ISO 1133 cm³/10 min 14 Mechanical Properties Charpy Notched Impact Strength, 23° C ISO 179/1eA kJ/m² 19 Charpy Notched Impact Strength, -30 °C ISO 179/1eA kJ/m² 9 Charpy Unnotched, 23 °C ISO 179/1eU kJ/m² 100 Charpy Unnotched, -30 °C ISO 179/1eU kJ/m² 90 Izod Notched Impact Strength, 23 °C ISO 180/A kJ/m² 19 Izod Notched Impact Strength, -30 °C ISO 180/A kJ/m² 9 Tensile Modulus ISO 527 MPa 2500 Tensile Stress at Yield, 23 °C ISO 527 MPa 46 Tensile Strain at Yield, 23 °C ISO 527 % 2,6 Tensile Stress at Break, 23 °C ISO 527 MPa 34 Tensile Strain at Break, 23 °C ISO 527 % > 15 Nominal Strain at Break, 23 °C ISO 527 % 19 Flexural Modulus, 23 °C ISO 178 MPa 2400 Flexural Strength, 23 °C ISO 178 MPa 73 Hardness, Ball Indentation ISO 2039-1 MPa 106 Thermal Properties Vicat Softening Temperature, VST/B/120 (50N, 120 °C/h) ISO 306 °C 106 Vicat Softening Temperature VST/B/50 (50N, 50 °C/h) ISO 306 °C 104 Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) ISO 75 °C 99 Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa) ISO 75 °C 104 Coefficient of Linear Thermal Expansion ISO 11359 10-6/°C 80 Electrical Properties Dielectric Strength, Short Time, 1.0 mm IEC 60243-1 kV/mm 36 Comparative Tracking Index IEC 60112 V 600 Other Properties Density ISO 1183 kg/m³ 1040 UL94 rating at 1.5 mm thickness IEC 60695-11-10 - HB Glow wire test (GWFI), 2.0 mm IEC 60695-2-12 °C 700 Processing Linear Mold Shrinkage ISO 294-4 % 0,4 - 0,7 Melt Temperature Range ISO 294 °C 230 - 260 Mold Temperature Range ISO 294 °C 60 - 80 Drying Temperature - °C 80 Drying Time - h 2 - 4 Typical values for uncolored products
Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities.
Please consult our local sales or technical representatives for details. -
Processing
Processing of NOVODUR H702
-
Safety Data Sheet