Zylar 960
The product line Zylar® comprises blends from styrene, butadiene and methylmethacrylate copolymers (MBS). The blends are highly transparent, tough and show a good chemical resistance. Depending on the application, they can be a low density alternative for polycarbonate, PET-G or transparent ABS (MABS). The grades are suitable for medical applications, food contact statements are available upon request. Zylar®960 is the grade with the highest toughness at still high transparency.
Key Features
- High flowability
- Impact strength
- Sterilisable(ETO,NO2,Irradiation)
- Low density
Applications
- Household applications
- Food contact applications
- Medical devices
- Medical diagnostic equipment
- Toys, sports & leisure
-
Grade Version
-
Properties
특성
섭씨 23도에서 변색되지 않는 제품에 대한 일반적인 값 테스트 방법 단위 값 유동적 특성 Melt Flow Rate, 200 °C/5 kg ASTM D 1238 g/10 min 6 기계적 특성 Izod Notched Impact Strength, 23 °C (73 °F) ASTM D 256 ft-lb/in 11 Impact Strength, Gardner ASTM D 5420 in-lbs 170 Tensile Stress at Yield, 23 °C ASTM D 638 psi 3400 Tensile Modulus ASTM D 638 psi x 10³ 250 Elongation, Failure ASTM D 638 % 70 Flexural Strength, 23 °C ASTM D 790 psi 6200 Flexural Modulus, 23 °C ASTM D 790 psi x 10³ 250 Hardness, Rockwell ASTM D 785 R scale 62 열 특성 Vicat Softening Temperature, B/1 ( 120 °C/h, 10N) ASTM D 1525 °F 201 Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) - °F 187 기타 특성 Refractive Index, Sodium D Line ASTM D 542 - 1.57 Light Transmission at 550 nm ASTM D 1003 % 91 Haze ASTM D 1003 % 1.8 처리 중 Density (ASTM ) ASTM D 792 g/cm³ 1.05 Water Absorption, Saturated at 23 °C ASTM D 570 % 0.1 Processing Melt Temperature Range - °F 400 - 460 Mold Temperature Range - °F 80 - 130 Rear Temperature Range - °F 380 - 430 Middle Temperature Range - °F 390 - 440 Front Temperature Range - °F 400 - 450 Drying Temperature - °F 150 Drying Time - h 2 Max Service Temperature - °F 480 Typical values for uncolored products
Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities.
Please consult our local sales or technical representatives for details. -
Processing
처리 중
-
Safety Data Sheet